All Categories
Vertical Pressure Vessel Biological Fermentation Tank
Vertical Pressure Vessel Biological Fermentation Tank
Vertical Pressure Vessel Biological Fermentation Tank
Vertical Pressure Vessel Biological Fermentation Tank

Vertical Pressure Vessel Biological Fermentation Tank


Place of Origin:

CHINA

Brand Name:

Zhang

Model Number:

Customization

Certification:

CE,ASME,PED,MOM

INQUIRY
Specifications

Minimum Order Quantity:

1Set

Price:

Starting at $30,000

Packaging Details:

Wooden pallets/ cartons/plastic stretch-wrap

Delivery Time:

60 DAYS

Payment Terms:

T/T

Supply Ability:

80 SET/YEAR

图片1

Products Description

图片1图片2
Fermentation TankSeeding Tank

Material:SS304, SS316L, Titanium, Hastelloy, PTFE lined
Application Scope
Food industry:edible coloring matter, chocolate coating, filling food, syrup, flavoring, various additive, etc;
Medicine industry:medical ointment, ointment, lotion, cream, various vitamin, etc
Chemical industry :concerned with product of daily use: shampoo, detergent, cream, tooth paste, paraffin liquor, hair dye, etc.
Adhesive industry:rubber liquor, polyester sulfured, silicone, hot-melt adhesive, polyurethane, etc.
Basic Conditions for Fermentation Tank
The mechanical agitation fermentation tank is one of the common types used in the fermentation plant. It uses mechanical agitators to completely mix air and the mash, and make the oxygen dissolved in the mash, which guarantees the enough supply of oxygen for microbial growth, reproduction and fermentation. Several basic requirements needed to make fermentation tanks as followed:
➤ Fermentation tanks should have suitable scale of diameter to height, whichis generally about 1.7 to 4, the longer the tanks are, the higher the utilization rate of oxygen will be.
➤ Fermentation tanks can bear certain pressure. When fermentation tanks are normally working or being disinfected, there will certain pressure (hydraulic pressure and pneumaticpressure) and temperature in the tanks, so all of their components must have certain strength to bear the pressure.
➤ The stirring and ventilating device in fermentation tanksmake thegas and the liquid fully mixed to make sure that the fermentation broth must dissolve oxygen.
➤ Fermentation tanks should have sufficient cooling area. Inthe process of microbial growth and metabolism, it will release a lot of heat. So in order to control the temperatures on different stages in the fermentation process, it should be equipped with adequate cooling area.
➤ Fermentation tanks must minimize dead cornersto avoid accumulation of dirt, so it can be thoroughly sterilized to avoid bacterial contamination.
➤ The seal of agitators should be tight to minimize leakage.

a universal batch dryer suitable for drying materials such as powders, granules, pastes and viscous slurries, especially when products are heat sensitive, contain solvents and are toxic or explosive.

The vapors are removed through a dust filter fitted on top of the vessel. This then prevents the dust from penetrating into the vacuum system.

drying heat-sensitive products

Sampler for taking samples from the product inside the dryer under vacuum.

图片4
图片5

Size Scale of Fermentation Tank
There is a certain scale of the size of each part of the tank. The scale of height to diameter of the tank is about 1.7 to 4.
Fermentation tanks usually are equipped with two sets of agitators. The distance between the two sets of agitators (S) is about three times as the diameter of the agitator. For large-scale fermentation tanks or those that have high liquid depth (HL), they can install three or more sets of agitators. It will be better if the agitator at the bottom is close to the exit of air dust, and the distance to the bottom of the tank (C) equals to the diameter of the agitator (Di), but could not be less than 0.8 times of Di, otherwise it will affect the cycle of liquid.

图片3
图片4

Technical parameters of fermentation tank

Nominal Volume
(m³)

Diameter of internal tank
(mm)

Mixing shaft rotational speed
;(rpm)

Mixing shaft power
(kw)

10

1800

160-260

17-22

15

2000

160-260

20-30

...

...

...

...

200

4600

140-240

215-360

Technical parameters of fermenting and seeding tank

Nominal Volume
           (m³)

Diameter of internal tank(mm)

Inner tank height
           (mm)

Mixing shaft rotational speed(rpm)

Mixing shaft power
           (kw)

0.05

300

700

300-350

0.55

0.1

400

800

300-350

0.75-1.1

0.2

500

1000

280-340

0.75-1.5

...

...

...

...

...

5.0

1400

3200

180-220

7.5-18.5

Design / Calculation Software

图片5

Custom Service

➤Our Products for pharmaceutical and chemical industries
1. Multifunctional “Three in One” (filtering, washing and drying)
2. Crystallizing Tank, Reaction Kettle
3. Sterile double-cone dryer
4. Rake Vacuum Dryer /Paddle Vacuum Dryer
5. Plate-fin Heat Exchanger
➤Our advantage
1. Special Equipment: Pressure Equipment, Equipment made of anti-corrosion materials, Sterile Equipment
Equipment made of anti-corrosion materials includes: anti-corrosion lining plastic/ PTFE/ enamel,
Ti/HC22/Mone11
2.Customized Design: Double-Cone in 20L-20m³
Rake Dryer (with mechanical seal) in 16 m³
DN300-DN600 “Three in One”
3.Design/Calculation Software
➤Scope of business
1. On-site Inspection
2.Technical Innovation Plan for Equipment Technical Improvement Plan for Equipment’s Structure Optimization Fast and Effective Solution to Equipment Malfunctions Highly Efficient and Precise On-site Construction Service Commitment to a Deadline in Customization A Full Range of long-term on-site technical maintenance service
3. Maintenance
4. Technical Solutions
5.On-site Testing and Training
6. Spare Parts

Company Profile

1

2

3

4

5

6

7

8

INQUIRY

Subscribe Us

Any questions can be described here and we will reply to you as soon as possible

Exhibition